Cleaning The Control Unit
To clean your VitalWear System, please follow these simple steps:
1. Remove electrical cord, fold down handle, and remove top assembly.
2. Fill the empty Fluid Canister to the MAX fill line with fresh, room tempera-
ture water.
3. Replace top assembly, electrical cord, and raise handle to lock.
4. Turn system ON for 10 minutes with setting on maximum COLD.
5. Empty canister and follow directions under “Storage” on page 23.
6. Repeat these actions periodically.
Cleaning The Wrap
The VitalWrap can be washed in a conventional laundry machine.*
Notice the following cleaning instructions on the VitalWrap.
Machine Wash Cold Do Not Iron
Delicate/Gentle Cycle Do Not Dry Clean
Do Not Bleach Do Not Wring
Line Dry In Shade
*VitalWear recommends a maximum of three machine washes per VitalWrap.
Users should not use cleaning or decontamination methods different
from those recommended by the manufacturer without first checking
with the manufacturer that the proposed methods will not damage
the equipment.
30°
Storage
1. Turn it Off: Switch the appliance off and remove the electrical cord from the
power source and from the Appliance Inlet.
2. Keep Dry: DO NOT immerse the appliance in water.
3. Coil It: Wrap and secure the electrical cord.
4. Disconnect It, Part 1: Disconnect the Tubing Set from the control unit.
5. Open It Up: Remove the top assembly and gently lay it on its side.
6. Pour it Out: Hold the Fluid Canister by the handle with one hand and under
-
neath with the other hand. Pour the water and any remaining ice out of the
Fluid Canister from the opposing lip from the ice strainer.
7. Dry it Out: Simply dry the dip tubes with a soft absorbent cloth.
8. Disconnect It, Part 2: Remove the Tubing Set from the wrap.
9. Lock it Up: Wrap and secure the Tubing Set.
10. Roll it Up: Dry and then roll or fold the wrap for storage.
11. Last Step: Store wrap in the canister or with the system in the carrying bag.
Care And Maintenance Of Your RecoveryWrap System
(Or Things You Must Remember!!!)
• YOU MUST Place the RecoveryWrap Unit in a safe, cool and dry place when
not in use.
• YOU MUST wipe with a soft, damp cloth. DO NOT use abrasive cleaner.
AND NEVER submerge the unit in any liquid. Keep away from all solvents and
harsh detergents.
• DO NOT attempt to repair this RecoveryWrap Unit. There are no user-service
-
able parts.
• To store YOU MUST always disconnect the electrical cord, the Tubing Set from
the top assembly and the wrap when not in use.
Velcro
™
is a registered trademark of Velcro Industries B.V.
All photographs ©Bang 2006
23
22
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals